The EPEVER Tracer AN Sequence Photo voltaic Cost Controller is often a hugely efficient photo voltaic controller made for off-grid solar programs. Depending on multiphase synchronous rectification technologies, it makes certain optimized energy conversion and program security for a wide range of photovoltaic (PV) apps.
Key Characteristics of the EPEVER Tracer AN Series Controller
The Tracer AN sequence makes use of EPEVER Photo voltaic Cost Controller technologies for excellent photo voltaic Power harvesting. Vital characteristics consist of:
Multiphase Synchronous Rectification (MSR) for enhanced Electricity conversion.
Advanced MPPT Algorithm with >ninety nine% efficiency.
Twin-Stage Charging for enhanced battery existence.
Liquid crystal display Exhibit with authentic-time data monitoring.
A number of Load Control Modes which includes manual and timer.
In depth Electronic Protections towards overcharging, above-discharging, limited circuits, and reverse polarity.
Action-by-Action Guide to Creating the EPEVER Tracer AN Sequence Controller
one. Unboxing and Getting ready the Controller
Assure all elements are involved: Tracer AN device, temperature sensor, interaction cables, and person handbook.
Confirm the design variety and voltage scores match your photo voltaic panel and battery technical specs.
two. Mounting the Cost Controller
Pick out a very well-ventilated, dry place near to the battery financial institution.
Protected the Tracer AN controller utilizing the furnished mounting brackets.
Preserve proper clearance for warmth dissipation.
three. Wiring the Solar Demand Controller
Warning: Normally observe suitable basic safety protocols and make sure the process is run off before connecting factors.
Action 1: Link the battery terminals to the cost controller (beneficial to good, damaging to negative).
Move two: Link the photo voltaic panel array on the PV input terminals.
Move three: Link the load terminals if employing a immediate load connection.
Move four: Double-Examine all connections for polarity and tightness.
4. Configuring the Controller Configurations
Power over the controller by connecting the battery to start with.
Utilize the LCD display to navigate the configurations menu.
Configure:
Battery Sort: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Control Modes: Handbook, timer, mild control.
five. Monitoring and Details Logging
The Tracer AN Sequence supports genuine-time checking using the MT50 distant meter.
Knowledge may be logged by using the RS485 conversation port utilizing software for instance Solar Station Computer system.
Remote checking is achievable with the EPEVER WiFi module.
six. Troubleshooting Typical Difficulties
Concern 1: No Electricity Output
Verify battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Situation two: Over-Voltage Defense
Verify the photo voltaic array’s voltage rating.
Alter system parameters if needed.
Problem three: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT options in the menu.
Advantages of the Tracer AN Series with MSR Know-how
The multiphase synchronous rectification technologies makes certain:
Greater Effectiveness: Reduced Strength losses during conversion.
Improved Trustworthiness: Stable effectiveness under variable masses.
For a longer period Battery Existence: Dependable and correct charging profiles.
Summary
The EPEVER Photo voltaic Charge Controller with multiphase synchronous Read more rectification know-how is an Extraordinary option for optimizing solar power era and increasing battery lifestyle. By adhering to the above mentioned setup information, buyers can make sure greatest performance and method longevity.