The EPEVER Tracer AN Sequence Photo voltaic Charge Controller is usually a really effective solar controller suitable for off-grid photo voltaic devices. Determined by multiphase synchronous rectification technologies, it guarantees optimized Electricity conversion and process balance for a variety of photovoltaic (PV) purposes.
Key Functions on the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence utilizes EPEVER Solar Cost Controller technological innovation for excellent photo voltaic Electricity harvesting. Vital attributes consist of:
Multiphase Synchronous Rectification (MSR) for improved Power conversion.
Superior MPPT Algorithm with >99% efficiency.
Dual-Stage Charging for Increased battery everyday living.
Liquid crystal display Display screen with authentic-time facts checking.
Several Load Handle Modes together with guide and timer.
Detailed Digital Protections in opposition to overcharging, in excess of-discharging, limited circuits, and reverse polarity.
Phase-by-Stage Manual to Organising the EPEVER Tracer AN Sequence Controller
1. Unboxing and Preparing the Controller
Ensure all factors are bundled: Tracer AN unit, temperature sensor, conversation cables, and consumer handbook.
Validate the product selection and voltage scores match your photo voltaic panel and battery specifications.
2. Mounting the Demand Controller
Pick a very well-ventilated, dry site near to the battery lender.
Protected the Tracer AN controller utilizing the presented mounting brackets.
Keep appropriate clearance for heat dissipation.
three. Wiring the Photo voltaic Cost Controller
Caution: Usually comply with proper protection protocols and make sure the program is powered off before connecting parts.
Step one: Hook up the battery terminals on the charge controller (positive to favourable, detrimental to damaging).
Step two: Hook up the solar panel array towards the PV input terminals.
Move three: Join the load terminals if utilizing a direct load relationship.
Phase 4: Double-Test all connections for polarity and tightness.
four. Configuring the Controller Settings
Ability within the controller by connecting the battery to start with.
Use the Liquid crystal display Screen to navigate the settings menu.
Configure:
Battery Form: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Manual, timer, gentle Manage.
five. Monitoring and Information Logging
The Tracer AN Sequence supports true-time monitoring utilizing the MT50 remote meter.
Details might be logged by way of the RS485 communication port applying software including Photo voltaic Station Personal computer.
Remote checking is possible Along with the EPEVER WiFi module.
6. Troubleshooting Common Difficulties
Concern one: No Electrical power Output
Look at battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Issue two: More than-Voltage Security
Verify the photo voltaic array’s voltage rating.
Change system parameters if important.
Problem three: No Battery Charging
Inspect PV wiring for continuity.
Verify MPPT settings inside the menu.
Great things about the Tracer AN Series with MSR Engineering
The multiphase synchronous rectification engineering makes sure:
Larger Performance: Decreased Electricity losses in the course of conversion.
Increased Reliability: Steady general performance Click Here under variable hundreds.
Lengthier Battery Daily life: Consistent and correct charging profiles.
Summary
The EPEVER Solar Charge Controller with multiphase synchronous rectification know-how is definitely an exceptional choice for optimizing solar power technology and extending battery everyday living. By subsequent the above mentioned set up guide, consumers can assure maximum effectiveness and process longevity.