The EPEVER Tracer AN Collection Photo voltaic Demand Controller can be a remarkably economical solar controller designed for off-grid solar techniques. Based upon multiphase synchronous rectification technologies, it assures optimized Strength conversion and process security for a variety of photovoltaic (PV) purposes.
Essential Functions in the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence makes use of EPEVER Solar Cost Controller technological innovation for remarkable photo voltaic Electricity harvesting. Critical capabilities involve:
Multiphase Synchronous Rectification (MSR) for enhanced Electrical power conversion.
Highly developed MPPT Algorithm with >ninety nine% effectiveness.
Dual-Stage Charging for Improved battery existence.
Liquid crystal display Screen with true-time data monitoring.
Multiple Load Command Modes together with handbook and timer.
In depth Electronic Protections against overcharging, over-discharging, shorter circuits, and reverse polarity.
Move-by-Move Guidebook to Creating the EPEVER Tracer AN Sequence Controller
1. Unboxing and Planning the Controller
Make sure all factors are incorporated: Tracer AN device, temperature sensor, conversation cables, and consumer guide.
Verify the model selection and voltage scores match your photo voltaic panel and battery specifications.
two. Mounting the Demand Controller
Decide on a properly-ventilated, dry spot near to the battery lender.
Secure the Tracer AN controller using the provided mounting brackets.
Keep appropriate clearance for heat dissipation.
three. Wiring the Photo voltaic Cost Controller
Caution: Always follow good basic safety protocols and make sure the procedure is run off in advance of connecting parts.
Stage 1: Join the battery terminals to your cost controller (good to positive, detrimental to adverse).
Phase two: Link the solar panel array to your PV enter terminals.
Phase 3: Connect the load terminals if employing a direct load connection.
Action four: Double-check all connections for polarity and tightness.
four. Configuring the Controller Options
Electrical power around the controller by connecting the battery 1st.
Make use of the Liquid crystal display Screen to navigate the settings menu.
Configure:
Battery Style: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Regulate Modes: Guide, timer, light-weight Management.
five. Checking and Details Logging
The Tracer AN Series supports serious-time monitoring using the MT50 distant meter.
Data could be logged by means of the RS485 communication port employing software for example Photo voltaic Station PC.
Remote monitoring is possible Along with the EPEVER WiFi module.
six. Troubleshooting Typical Difficulties
Problem one: No Ability Output
Look at battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Problem two: Above-Voltage Security
Verify the photo voltaic array’s voltage Click Here ranking.
Modify procedure parameters if required.
Issue 3: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT configurations inside the menu.
Great things about the Tracer AN Collection with MSR Technological innovation
The multiphase synchronous rectification technologies assures:
Greater Efficiency: Minimized Electrical power losses for the duration of conversion.
Improved Dependability: Secure performance beneath variable hundreds.
For a longer time Battery Life: Regular and correct charging profiles.
Summary
The EPEVER Photo voltaic Demand Controller with multiphase synchronous rectification technologies is definitely an Excellent option for optimizing solar power generation and lengthening battery daily life. By pursuing the above mentioned setup manual, end users can assure utmost performance and method longevity.